Fabrication of alumina ceramics with functional gradient structures by digital light processing 3D printing technology

Alumina ceramics with different unit numbers and gradient modes were prepared by digital light processing (DLP) 3D printing technology. The side length of each functional gradient structure was 10 mm, the porosity ratio was controlled to 70%, and the number of units were (1 × 1 × 1 unit) and (2 × 2 × 2 unit) respectively. The different gradient modes were named FCC, GFCC-1, GFCC-2 and GFCC-3. SEM, XRD, and other characterization methods proved that these gradient structures of alumina ceramics had only α-Al2O3 phase and good surface morphology. The mechanical properties and energy absorption properties of alumina ceramics with different functional gradient structures were studied by compression test. The results show that the gradient structure with 1 × 1 × 1 unit has better mechanical properties and energy absorption properties when the number of units is different. When the number of units is the same, GFCC-2 and GFCC-3 gradient structures have better compressive performance and energy absorption potential than FCC structures. The GFCC-2 gradient structure with 1 × 1 × 1 unit has a maximum compressive strength of 19.62 MPa and a maximum energy absorption value of 2.72 × 105 J/m3. The good performance of such functional gradient structures can provide new ideas for the design of lightweight and compressive energy absorption structures in the future.     

Recent advances in the microencapsulation of omega-3 oil and probiotic bacteria through complex coacervation: A review

BackgroundFunctional foods are a fastest growing sector of the food industry. The development of functional foods comprising omega-3 fatty acids and probiotic bacteria, through complex coacervation process is an emerging area of research and product development.Scope and approachWe reviewed relevant literature concerning the use of complex coacervation in microencapsulation, focusing primarily on the inclusion of probiotic bacteria and omega-3 oils into a single delivery format. This review covers advantages and disadvantages of the complex coacervation process to microencapsulate bioactive ingredients, viability of probiotic bacteria and oxidative stability of omega-3 oil during the complex coacervation process, the bioaccessibility of omega-3 oil and probiotic bacteria during simulated gastrointestinal conditions and in-vivo testings.Key findings and conclusionsThe review describes the advantages of co-encapsulation using complex coacervation followed by spray drying. It also describes the technological hurdles that need to be resolved for further development of industrial applications of co-encapsulation of probiotic bacteria and omega-3 lipids. The co-encapsulation concept has been widely used in pharmaceutical delivery systems, but is a relatively new concept in food ingredient stabilisation and delivery. There is a commercial need of co-encapsulation of multiple bioactive ingredients within a single microcapsules, due to decreased cost and enhanced product quality. Complex coacervation has been shown to be a useful method for the co-encapsulation of multiple unstable bioactive ingredients. Although in-vitro evaluation deliver useful bioavailability information, additional in-vivo and clinical trials are needed to determine the efficacy of bioactive release, particularly for microcapsules containing multiple bioactive ingredients.     

区域控制器的安全需求建模与自动验证

轨道交通区域控制器（ZC）是我国轨道交通信号系统选型的主流制式——基于通信的列车控制系统（CBTC）的核心子系统，其突出的安全性使得安全需求的形式化验证成为一个非常重要的问题.但是ZC自身的复杂性以及领域知识的繁杂难以掌握，使得形式化方法很难应用到安全需求的验证中去.针对这些问题，提出一种安全需求的自动验证方法，使用半形式化的问题框架方法（PF）来建模和分解安全需求，根据需求模型自动生成安全需求的验证模型和验证性质，在此基础上自动生成验证模型的Scade语言实现，并通过Design Verifier验证器对需求进行组合验证.最后，使用了某个实际案例ZC的一个子问题CAL_EOA进行了研究，实验结果证明了该方法的可行性与有效性，它能自动地将安全需求模型进行组合验证，改善了验证的效率.     

Inulin-based emulsion-filled gel as a fat replacer in prebiotic- and PUFA-enriched dry fermented sausages

In order to produce fermented sausages with prebiotic fibre and improved fatty acid composition, 16% of pork back fat was replaced with inulin gelled suspension (I) and inulin linseed oil gelled emulsion (IO). Physico-chemical analysis, fatty acid profiles, lipid oxidation, microbiological, textural, colour and sensory analysis were carried out. The fat content was lower in I (31.38%) and IO (35.36%) modified sausages compared to control (44.37%) (P < 0.05). IO sausages had lower SFA and MUFA and higher PUFA content with an improved n-6/n-3 ratio (2.23) (P < 0.05) and α-linolenic acid increment (5.74 g per 100 g). Reformulation led to decrease in springiness, chewiness and hardness and increase in adhesiveness of the sausages. Modified sausages had lower L* and higher a* values, while b* values of I sausages did not differ compared to control sausages. Modified sausages were acceptable regarding all sensory attributes. Lipid oxidation parameters showed higher susceptibility to oxidation and lipolysis in IO sausages.     

Microwave synthesis of worm-like SiC nanowires for thin electromagnetic wave absorbing materials

Thin thickness is always the pursuit of excellent electromagnetic wave absorbing materials. Herein, SiC nanowires with worm-like morphology were synthesized by microwave heating the mixture of expanded graphite and silica. The worm-like SiC nanowires exhibit an excellent microwave absorption ability at a thin thickness. With the filling ratio of SiC nanowires increases in the matrix, the dielectric loss and microwave absorbing ability are significantly enhanced; meanwhile the number of absorption peaks is gradually increased, and the absorption peaks also move toward a thinner thickness. When the nanowires filling ratio was 40?wt%, the minimum reflection loss reached down to ?35.2?dB and the effective absorption (RL?<??10?dB) bandwidth was 1.8?GHz?at a thickness of 1.3?mm. The possible growth mechanism of the worm-like SiC nanowires is that the intermediate reaction gas phases, SiO and CO, were confined in the relatively independent tiny pores of expanded graphite. This resulting in an excessive local gas phase pressure, which causes the nanowire growth direction changes randomly.     

Fluoride-mediately solvothermal synthesis and tunable photocatalytic selectivity of urchin-like ZrO2 hollow microspheres

Photocatalysts often show excellent performances on the basis of their surface state of exposed faces with high reactivity, but unfortunately surfaces of this type are usually concealed into the interior of crystals for their high surface energy. We report here a possibility that for fluorine-terminated surfaces of monoclinic ZrO₂, these higher-energy surfaces could be retained and exposed. Urchin-like ZrO₂ hollow microspheres (UZHS) composed of nanoribbons with exposed (010) facets are obtained through a fluoride mediately solvothermal method. We prove the stabilization effect of fluorine adsorption on (010) facets by density functional theory calculations. More interestingly, UZHS exhibit tunable photocatalytic selectivity in dye degradation. The fluorinated UZHS exhibit good performances both on decomposing Congo red (CR) and methylene blue, while the surface-modified UZHS by calcination only favor decomposition of CR.     

Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

The protein properties of germinated naked barley with infrared and hot air-drying and its noodle-making potential

The naked barley was germinated and then carried out with hot air- or infrared drying to explore the physicochemical and functional properties of protein isolated from barley. Moreover, the relationship between protein and the noodles made from wheat and germinated barley flour was evaluated. It was found that germination affected the protein properties, and the protein properties were correlated with the properties of noodles. The content of β-sheet in protein was first increased and then decreased with germination time increased, and the protein had larger emulsification and foaming properties. Besides, the protein isolated from hot air-dried germinated barley had higher gelatinisation enthalpy and secondary structure content. Furthermore, the wheat and germinated barley mixed noodles had increased elasticity and cohesiveness and reduced viscosity and water absorption. The hardness of noodles showed was positively correlated with water absorption capacity, and the extensibility of cooked noodles was positively correlated with the foaming capacity of proteins.     

Functional and textural properties of vegetable‐fibre enriched yoghurt

In this study, different vegetable‐fibre enriched yoghurts namely control (C), pumpkin (PY), carrot (CY), green pea (GY) and zucchini (ZY), were produced. It was observed that Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus counts were higher in yoghurts supplemented with vegetable purees, in accordance with the enhanced growth of lactic acid bacteria due to the fibres, phenolic compounds and organic acids present in the vegetables. Furthermore, vegetable puree supplementation affected the pH, titratable acidity, syneresis, colour (L*, a*, b*, ΔE values), texture (firmness, cohesiveness, consistency and viscosity index) and sensorial properties of the yoghurts. Firmness, consistency and viscosity indices were higher in the yoghurt produced with carrot puree, whereas the highest antioxidant capacity was detected in the pumpkin yoghurt, which corresponded to the highest total phenolic, ascorbic acid and total carotenoid contents. The results of the present study could lead to an innovative approach in the functional dairy product market for the development of dairy products enriched with vegetables that have nutritional and potential therapeutic characteristics.